Completed 1912 Titanic Project: E0200 Scallop Edge Skirt

This is the second of my postings from my first project for the  1912 Titanic Sew Project, and I must say, I really enjoyed this pattern, and look forward to the ones I'll be working on in the future.

First I'll begin this post with the obligatory checklist for the project:

Pattern Checklist:

1. Pattern Description: E0200 Scallop Edge Skirt.
2. Pattern Sizing: The pattern lists the skirt as having a 34 inch waist, which is pretty accurate. I did not need to do any altering as this is already my waist measurement.
3. Did it look like the photo/drawing on the pattern envelope once you were done sewing it? I think it looked pretty close to the drawing. The only real difference I see is that the scallops in the drawing seem deeper and more curved than they turned out to be from the pattern.
4. Were the instructions easy to follow? The instructions were pretty straightforward. I don't recall having any real issues when reading them.
5. What did you particularly like or dislike about the pattern? I really liked this pattern as it was easy to follow and easy to put together. I think it was a great starter pattern for this time period. 
6. Fabric Used: brown striped linen
7. Pattern alterations or any design changes you made: no significant changes
8. Would you recommend this pattern to others? I would definitely recommend this pattern to anyone that was interested in an attractive and easy to put together skirt.
9. Conclusion I really enjoyed sewing this skirt and am working on a blouse to go with it. 

VPLL Checklist:

1. Pattern name: 0200 Ladies skirt (scallop edge)
2. Sewer's skill level:  Intermediate
3. Pattern rating: 4- better than average.
4. What skill level would someone need to sew this pattern and why?  I would say somewhere between a beginner and intermediate. It might not be the best first project, but with some sewing experience, I think someone could easily put this pattern together. Of course, that's coming from a no alterations standpoint, if alterations are necessary, sizing up or down, a higher skill level might be needed. 
5. Were the instructions easy to follow? If not, what needs to be changed? I thought the instructions were very clear and easy to follow.
6. How was the fit/sizing? Did it correspond to what you thought? For me the sizing was great, and it seems to fit me pretty well. 
7. Did you make any pattern alterations? If so, what alterations did you make? Were they fit or design alterations? No alterations.

So here is a photo of the finished skirt (please forgive the atrocious photo quality, I don't have a nice camera at the moment). I swear I ironed it, TWICE! Le sigh..That's what I get for using linen ;P. It doesn't look as wrinkly in person, I think the low light of my hallway is casting too many shadows and finding every tiny wrinkle...

Beyond the wrinkles, I think it turned out pretty well. The only change I might make is to put something in the hem to help it keep it's shape more, perhaps some horsehair or something. If I were to make another one, I would probably not use my machine to tack down the scalloped edge facing, I'd probably do it by hand to avoid the slight puckering along that seam that is making it look so wrinkly. But you know what they say, you live and you learn :P.

 

    Here is a back view.

And a side view.

And thus concludes my version of E0200 from the VPLL Titanic sewing project. Hopefully I will be sharing some more finished projects soon. Stay tuned!

In memoriam

My beloved Zeus.

Broken promise

I know I promised photos of my recently finished Civil War projects, and I apologize for not following through. Tragedy struck, and my beloved Zeus (my 8 year old Bengal) passed away. His passing has been hard to bear, but I am managing. I will be posting some photos very soon, possibly even tonight.

Sew day!

Currently I am en route to a friends in Clarksville TN to sew for our reenactment next weekend! We will be participating in the 150th of the Battle of Perryville. My goal is to finish up a few projects that have been in the works for a while, and also to start a corded petticoat and a wrap dress for morning time..I will post photos as progress is made :).

Construction of 1912 Scalloped Edge Skirt

So this is my first of two posts about the construction of my first pattern from the 1912 Titanic Sew Project .

This is a pattern for a lovely scalloped edge skirt from 1912. The skirt description states that the "skirt is made of heavy gray silk or taffeta, and is trimmed with covered buttons in any fabric desired." I really liked the striped looked in the illustration, so I specifically sought out a striped fabric.

I ordered mine by mail, as to avoid the pesky taping of pieces together (I've done that before and was not a fan). I'd like to comment on the quality of the paper of this pattern, I don't believe I've used a pattern on this type of paper before, but I quite liked it.  I went straight into cutting out the pieces in the beautiful linen I picked up from JoAnn's..I spent several days scouring local fabric stores till I found something I really liked, and I happened upon this really nice striped linen. Linen is, of course, not taffeta or anywhere close, but I do always tend to go my own way.. If I were a patient person, I would have started with a muslin version, but I tend to skip that step a lot. I typically only do a muslin if I'm really unsure of the construction of something. I was delighted to find that this pattern came in my waist measurement as is, so there was no need to make any alterations to the pattern. So I happily cut into my fabric and started sewing right away.

I started with the scallop edge facing. I knew the scalloped edge would be the most difficult thing to tackle, so I started with it. I cut the scalloped edge facing from a nice, dark brown linen/cotton blend (I tend to sew with only natural fabrics, I just love them so).

Here I folded over the straight edge of the scalloped edge facing and ironed as per the instructions.

Here's a better picture of the facing as I'm preparing it.

And here you can see that I just sewed down the folded over edge to create a finished edge for the edging. 

So here I lined up the facing with the scalloped edge side of the skirt, and topstitched it down, with the facing on what will be the inside of the skirt. 

Here I used my bias tape maker tool that I found in the quilter's department to make my own bias tape for the edge around the scalloped edge/facing.

I just ironed it in half and then pinned it along the edge of scalloped piece.

I then very slowly and carefully topstitched the the binding on. This was painstaking, and time consuming, but I think it turned out pretty well.

Once I finished attaching the binding on the edge of the scallop front, I pieced the panels together. I left an opening on the scalloped edge side (left front), probably about 6 inches long, where I later attached hooks and eyes for closure.

Next I used covered buttons, which I covered with the same brown linen/cotton that I used to bind the edge of the scalloped front piece, to decorate each scalloped edge. This was my first time using covered buttons, and it didn't occur to me that the fabric was so thin that you might be able to see the metal through the buttons..it's not as noticeable on the skirt, so I decided to leave it as is, and consider it a lesson learned.

Here is a photo of the skirt about halfway through it's construction, I think it's turning out rather well, so far.

 I then attached the waist band to the body of the skirt. The directions recommended using canvas to reenforce the waist band, but I didn't have any on hand, so I used denim, which seemed to do the trick. I then hand stitched down the waist band to create an invisible finish from the front. I forgot to take a photo of this step!

I then finished the edges of each piece with a zig-zag stitch (one day I'll get a serger!)

Last but not least, I hemmed the skirt using an "invisible hem" stitch, because I absolutely deplore hand sewing and will avoid it if at all possible..

So this concludes the construction of my scalloped edge 1912 skirt for the Titanic Sew Along Project. I will be following up with a subsequent post with photos of the finished project very shortly!

This post is not related to sewing at all

So as you may have guessed from the title, this post has nothing to do with sewing, unless you count it's subjects attempts at "helping" me with sewing...

 This is Oliver, the best cat/kitten I've ever had, and that's saying a lot..he may be strange looking to some, but he is the sweetest, most loyal creature I've ever encountered. He's smart, funny, and he sleeps curled up with me in bed every night!

He also likes to party!

He also likes to snuggle with others :).

And when he gets cold, he gets to wear this awesome sweater with a hood! Made by my good friend Nikki, whose blog you can find here.

A fantastic find!

I recently came across a fantastic Craislist find! I was able to purchase a 1916 (date is approximated based on serial number) White treadle sewing machine for $60.

Here is what it looks like in its case! It has some cosmetic damage from being stored in someones basement for years, but is in pretty good shape otherwise.

After taking a look at the underneath, which really means my Dad (the engineer) took a look underneath, we believe that it's in pretty good mechanical shape. It does need a belt replaced and some cleaning/oiling. Also, it did come with the apparently pretty hard to find shuttle and bobbin!

My love and I traveled out to the man's home a few days prior to picking it up to see it and talk to the man about it. I loved it so much, I took a chance and went ahead and gave him the cash so that there wouldn't be a chance someone else would snatch it up. I knew I was getting a good deal, but I really had no idea at that time what a good deal I was getting!

A few days later, my dad and I rode over in his van to pick it up, it's quite large and bulky of course. My dad looked it over and agreed that it was nice. He started pulling out the drawers, and low and behold! there was a little black box..

 My dad pulled it out and the guy whom I was purchasing it from stated that he had no idea that the box was in there..I opened it up to reveal a treasure trove!

So many attachments, and I have no idea what most of them are for, but I love them already! The man that I bought it from said that I sure got my $60 worth, and he was right!

I've recently moved and still have a million boxes to unpack, so it will be a little while until I can work on Thelma (yes, I named the machine :P). Hopefully I will be posting about her progress soon.

Also, a future post will include quite a few other fantastic finds that I purchased from the same gentleman. Sadly his wife recently passed away, and was a quilter, so she had a vast fabric stash that he let me look through and I found so many wonderful pieces, not to mention a ton of records and some vintage hair clips! I'll be doing a more in depth post with photos soon!